♦
♦
♦
♦
Features
― Three Long Life Reversible Cutting Blades Constructed of AR400 Abrasion Resistant Plate
― Cuts Moving Forward or Reverse
― Flush Faced Couplers And Hyd Hoses Included. Hoses Protected In Nylon Sleeve
― Direct Drive Heavy Duty Gear Box
― Heavy Duty Greaseable Bearings For Long Bearing Life
― Loader Arms Raise and Lower Brush Cutter
― Universal Skid-Steer Mounting Plate Fits All Modern Full Size Skid-Steers (Optional Forklift Quick-Tach available)
― Raised Front Funnels Brush to Cutters - Heavy Duty Push Bar Aids In Pushing Over Saplings & Small Trees
SPECIFICATIONS
▶ Heavy Duty Design - Cuts Up To 5" Dia. Trees
▶ Hyd. Drive - Parker Motor With Omni Gearbox
▶ Hydraulic Flow Range - 12 To 28 Gpm - Maximum Hydraulic Pressure - 3000 PSI
▶ Minimum Hydraulic Requirements - 12 Gpm @ 2000 PSI
▶ Deck and Side Rails Constructed of ³⁄₁₆" Plate
― Three Long Life Reversible Cutting Blades Constructed of AR400 Abrasion Resistant Plate
― Cuts Moving Forward or Reverse
― Flush Faced Couplers And Hyd Hoses Included. Hoses Protected In Nylon Sleeve
― Direct Drive Heavy Duty Gear Box
― Heavy Duty Greaseable Bearings For Long Bearing Life
― Loader Arms Raise and Lower Brush Cutter
― Universal Skid-Steer Mounting Plate Fits All Modern Full Size Skid-Steers (Optional Forklift Quick-Tach available)
― Raised Front Funnels Brush to Cutters - Heavy Duty Push Bar Aids In Pushing Over Saplings & Small Trees
Special Safety Feature
Rotary cutter is equipped with a hydraulic motor cushion valve for shut down of the blade system. This feature lessens the chance of damaging the cutter’s hydraulic system or blade system when cutting larger diameter vegetation.
Rotary cutter is equipped with a hydraulic motor cushion valve for shut down of the blade system. This feature lessens the chance of damaging the cutter’s hydraulic system or blade system when cutting larger diameter vegetation.
▶ Heavy Duty Design - Cuts Up To 5" Dia. Trees
▶ Hyd. Drive - Parker Motor With Omni Gearbox
▶ Hydraulic Flow Range - 12 To 28 Gpm - Maximum Hydraulic Pressure - 3000 PSI
▶ Minimum Hydraulic Requirements - 12 Gpm @ 2000 PSI
▶ Deck and Side Rails Constructed of ³⁄₁₆" Plate
| For Skid-Steer Loaders |
||||
| Model | Width of Cut | Overall Width | Overall Height | Weight |
| 194-60 | 60" | 69" | 25" | 1,300 lbs. |
| 194-72 | 72" | 81" | 25" | 1,450 lbs. |
|
Optional Telehandler Quick-Tach Mounts Available |
|
| Model | Weight |
| 194-60QT | ± 1,450 lbs. |
| 194-72QT | ± 1,600 lbs. |
Note: Full Front Door Required for Safety On Skid-Steer – Call Star For After Market Door Options
