Forkframe Attachment
Built strong
Safety step for easy access
to operator's seat.
Safety -
Forks are "captive" and can't swing out
when a load of railroad ties or other loose material is dumped off the
end of the forks.
Good Visibility -
Fork tips are visible through frame
openings and expanded metal backstop. Good visibility makes it fast and
easy to pick up a load.
Heavy Duty Tapered
Backstop - Backstop is constructed of rugged 3/8" x 3" strap
steel and heavy gauge expanded metal. Tapered design and built-in side
and top steps allow easy access to and from the operator's seat
Telescoping Crane Jib
Turns a
skid-steer into a mini-crane
Reach farther - Lift higher.
This is one of our Skid Steer Attachments that Landscapers Love - The Telescoping Crane Jib is ideal for
loading, carrying, and setting trees and other large plants. The extra
lift height makes it possible to pick trees above the balance point for
safer handling.
Lots of Industrial Applications -
Plants, foundries, farms, in fact almost every industrial skid-steer
user finds the Telescoping Crane Jib to be an indispensable tool.
|
Root Grapples & Grapple Buckets
Skid-Steer Bucket
Better than the factory bucket
Standard Blade
-
A good choice if
you are not wearing out the blade before the bucket. It reduces the cost
and there is no sense paying for something you are not going to use.
OR
Punched Blade with
Bolt-On-Blade -
Helps you get more life from your
Skid-Steer buckets. Cleanup and/or snow removal on hard
surface can wear a bucket blade out prematurely. Add the
reversible 5/8"x8" bolt-on-blade and you get at least 3 times the wear.
|
Simple -
No moving parts: no flimsy chutes to get torn up.
No gates to freeze up with old concrete, no hydraulics to get
contaminated with dust and dirt. Works better than complicated systems
costing thousands of dollars.
Rugged -
Built to take the abuse of a fast
moving construction job. Reinforced corners strengthen the sides, The
bottom is protected and strengthened by half inch thick steel bars.
Overall rugged construction ensures dependability pour after pour. This
is a Skid-Steer attachment you can use, set in the yard, and when you
come back to use it again, you know it will work.
Inexpensive -
Simple, straight-forward design keeps costs low.
Typically pays for itself on the first pour.
Built To Fit
your Bucket
Shark Bite Tooth Bars are available to fit
all makes and models of loaders up to 15000 lbs. gross weight.
Loaders weighing over 7000 lbs. should choose the "Big Tooth" bar.
When ordering, specify bucket width (ID) and Blade thickness (measured
approximately 1" back from the leading edge of the blade). |
.jpg)
