SAFETY WORK PLATFORMS
 FOR FORKLIFTS

SAFETY WORK PLATFORMS
TURN YOUR FORKLIFT
INTO AN
AERIAL WORK PLATFORM

NEW improved entrance Gate Design & Modular Component Guardrails 
Safety Work Platform Model 1208G Meets/Exceeds OSHA & ANSI Requirements
  • Goes where scissor-lifts can't
  • Faster than scaffold
  • Provides a wider platform than boom lifts
  • Reaches over obstructions
  • Simple and Inexpensive
Other Features:
  • Expanded Metal Deck
  • 1½" square tube Guardrails
  • 1" diameter Fork Retaining Pins w/pin storage
  • End Fork Loops for easier handling of platform
  • Integral 5½" high Toeboards


   Spring Hinges and Spring Loaded Latches provides Self-Closing and Latching Gate Action - Increased Safety.

   New Modular Component Guardrails - Stronger and more rigid - no more loose movement in the rail system. Component Design also allows for replacement of individual components in lieu of having to replace a complete guardrail panel should damage occur.

Quick-Tach & Slip-on-Forks Models Available
Safety Work Platform Safety Work Platform
Safety Work Platform features pointed out
2 styles Quick-Tach and Slip-on-the Forks


Specifications

  • Full Perimeter Guard Rail System constructed of 1½" square steel tubing & consisting of a 42" high top rail, a mid rail, and 5½" high intregel  toeboards. Access gates with spring hinges and spring loaded latches provide self-closing and latching gate action for added safety are provided at each end. The modular component design allows for easy replacement of individual components. Entire Guard Rail System can be easily removed and laid flat inside platform for transportation.

  •  Deck consists of a strong but lightweight engineered steel frame with expanded metal deck.

  • The “Universal Fit” Slip-On-the-Forks design can be used with both Extendible Reach and Straight Mast forklifts. Forks slide into steel fork pockets and are secured with two heavy duty steel pins behind the heel of the forks. They are designed for use with a 48" or wider carriage and 48" long forks up to 7" wide and 2¾" thick. Forks longer than 48" can be used, however, they will extend out past the front of the platform.

  • The Quick-Tach models are built to fit specific makes & models of forklifts that are equipped with a quick-tach. The forks and carriage are removed and the Platform attaches to the boom.

  • All Models are rated at 1,000 lbs. load capacity. Rating applies to platform only and does not reflect capacity of forklift.Mast protection screen

  • Optional Mast Protection Screen (Model 1250) protects personnel from moving parts of forklift mast. Constructed of square steel tubing and expanded metal, the screen measures 42" wide x 84" tall. It attaches to the back guardrail with u-bolts. A mast protection screen should be used with all straight mast forklifts and with any others where a mast poses a safety hazard.


UNIVERSAL FIT "Slip-on-Forks" MODELS
Model Size Weight
1204C 4' x 4' xxx lbs.
1206C 4' x 6' xxx lbs.
1208C 4' x 8' 440 lbs.
1210C 4' x 9' 8"' 520 lbs.
When ordering for use on a Genie or Terex, use the suffix "G" instead of C.
 
"QUICK-TACH" MODELS
Model Size Weight
1204C 4' x 4' xxx lbs.
1206C 4' x 6' xxx lbs.
1208C 4' x 8' 590 lbs.
1210C 4' x 9' 8"' 670 lbs.
Specify forklift make & model when ordering QT platforms
 



Operation Manual Downloads:

Latest C and G Models

Latest B Series Models

Earlier Models