OVER-THE-BUCKET FORKS

Add the convenience of
a forklift to your loader

Take Forks ON and Off
without leaving the operator's seat.

    - Roll bucket forward
     - Engage free-standing forks with brackets
     - Roll bucket back to level forks

Don't buy a light-duty set of forks and bend them in the first month of use.
    Star Over-the-Bucket Forks are built stronger to last.
      Take a look at our specs and don't accept anything less.

FULLY FORGED FORKS Just like the ones on your forklift (these
are not forks built from two pieces of steel welded together that require a gusset to keep them from coming apart).

BIG 2" DIAMETER SOLID STEEL SHAFT 80" long. Same size shaft
as used on 6,000 and 8,000 lb forklifts.

HEAVY DUTY ¾" PLATE STEEL BRACKETS Brackets are built from
thicker plate so only 3 are required (more than 3 restricts side to side adjustment of forks.

We guarantee
you will be pleased with these forks.

Model (Shaft only)	Description			Weight
LBA 170-02	2" dia. by 80" long solid steel shaft with retainers			70 lbs.

Model (Brackets only)	Description			Weight
LBA 170B	Set of 3 - ¾" plate steel (weld-on) brackets			40 lbs.

Model (Forks only)	Fits Vertical Bucket Openings	Fork Description	Rated Capacity	Weight
LBA 170*	up to 42"	(set of 2) 1½" x 4" x 42"	5,500 lbs.	325 lbs.
LBA 180*	up to 54"	(set of 2) 1¾" x 4" x 48"	6,900 lbs.	408 lbs.
* Please specify exact measurement of vertical bucket opening.

Download Operating manual
Adobe Reader is necessary to read Brochures and Manuals. Download here.