|
|
|
|
SCOOP-N-MIX CONCRETE MIXER
(SKID-STEER
LOADER MUST BE EQUIPPED WITH AUXILIARY HYDRAULICS) |
|
Model |
Capacity |
|
140 |
9
cuft |
|
|
The new Scoop-N-Mix
Skid-Steer Concrete Mixer combines the advantages of a
loader and a concrete mixer into one piece of equipment that
provides the most efficient and economical way to produce
small quantities of thoroughly mixed concrete, transport it
to often "difficult to reach" pour sites, and then put it in
place.
|
Rotate the mixer into a bucket loading position.
The design of the new
Scoop-N-Mix permits the skid-steer's tilt cylinders to
rotate the mixer into a bucket loading position. This
allows sand and gravel for the mix to be scooped up, as with
a loader bucket, eliminating the back-breaking labor of
loading by hand.
|
 |
Rotate the mixer to its upright mixing position.
The tilt cylinders then rotate
the mixer to its upright mixing position where bags of
cement are broken into the mixer using the built-in bag
splitter. Water is then added and within a few short
minutes concrete is ready for placement.
|
 |
Discharge Concrete.
Concrete can be discharged in one of two ways through a
mechanical lift gate on the side of the mixer and down a
chute, or by simply tilting the mixer down with the tilt
cylinders and discharging out the top. Either
way, the speed and quantity of discharge can be easily
controlled.
|
|
THE SCOOP-N-MIX..
The fastest and
most economical way to produce small volumes of good
quality concrete.
We are all aware that
ready-mix companies don't want to deliver less than full
truckloads of concrete, and even if you can get small
quantities delivered, you will pay a much higher price and
will probably be the last on the delivery list. With
the Scoop-N-Mix and your skid-steer, you can produce
good quality concrete within minutes and without the back
breaking labor of hand loading a mixer. You will have
concrete when you need it, where you need it, and at a very
economical cost.
|
|
The Scoop-N-Mix
features a new improved design.
This new design incorporates a revolving
paddle mixing action, a system far superior to augers when
it comes to producing quality, well mixed concrete.
The revolving paddles are driven by a strong hydraulic motor
thru a dependable chain and sprocket drive. The
hydraulic motor is powered by the auxiliary hydraulics of
the skid-steer. The standard auxiliary hydraulic kit
on most skid-steers is very adequate. A high flow kit is not
required. The chain and sprocket drive takes the
shock-load off
the hydraulic motor, eliminating most any chance of damage
to the motor, thus greatly extending hydraulic motor life.
Neoprene pads protect paddles and are adjustable and
reversible for longer life. "Abrasion Resistant" steel
drum shell construction provides long drum life.
|
 |
|
Dimensions &
Weight
Mixer Drum width - 36"
ID
Overall width - 50"
Overall height - 35"
Overall depth - 30"
Empty weight - 750 lbs.
|
Mixing Capabilities
The Scoop-N-Mix is a
concrete mixer, not a grout
mixer, however it can mix grout if the mix design
incorporates 3/8" pea gravel.
Mixing capacity - 9 cuft. - 1/3 cuyd
Minimum recommended slump - 3"
Maximum coarse aggregate size - 3/4"
Mixing action - reversible revolving paddles |
|
Construction
All steel welded
construction
Mixing Drum - abrasion resistant steel
Built-in cement bag breaker
Side discharge mechanical lift gate
24" x 12" Side Chute
Reversible neoprene pads for mixer paddles
Chain & Sprocket drive
|
Skid-Steer Requirements
Skid-Steer mounting -
universal quick-tach
Recommended skid-steer rated capacity - 1600 lbs. or greater
(smaller skid-steers can sometimes be used if mixer is not
elevated)
Auxiliary Hydraulics - 12 to 15 gpm (high-flow not required)
Hydraulic Hoses and Quick-Disconnects are included.
Operating Manuals require Adobe Reader
|
|
|
