- Dramatically Increase Digging Capabilities
- Simple & Fast to Install
- Carry One Bucket Instead of Two
Durable
Quality materials and workmanship produce a tough long lasting tooth bar. Shanks are Heat Treated Cast Steel and conform to ASTM 4150 for greater strength and abrasion resistance. Weldments are 100,000 lbs tensile strength for high impact resistance.
Quality materials and workmanship produce a tough long lasting tooth bar. Shanks are Heat Treated Cast Steel and conform to ASTM 4150 for greater strength and abrasion resistance. Weldments are 100,000 lbs tensile strength for high impact resistance.
Installs with Only Two Bolts
Slip the tooth bar onto your blade, mark and drill a hole on each side. Install the two 3/4" bolts and nuts, tighten and it’s ready to dig. Heavy Duty Bars have an additional center bolt for greater strength on buckets 72" wide and over.
Slip the tooth bar onto your blade, mark and drill a hole on each side. Install the two 3/4" bolts and nuts, tighten and it’s ready to dig. Heavy Duty Bars have an additional center bolt for greater strength on buckets 72" wide and over.
Built To Fit your Bucket
Shark Bite Tooth Bars are available to fit all makes and models of loaders up to 15,000 lbs gross weight.
Shark Bite Tooth Bars are available to fit all makes and models of loaders up to 15,000 lbs gross weight.
Choose from 4 Styles
Light Duty
for Compact-
Loaders
Designed for the new
“Compact” Skid-Steers and
other small loaders with an
operating weight of 4,000 lbs
or less. A low cost bar for use
with buckets up to 50" wide.
for Compact-
Loaders
Designed for the new
“Compact” Skid-Steers and
other small loaders with an
operating weight of 4,000 lbs
or less. A low cost bar for use
with buckets up to 50" wide.
Standard Duty
for Medium
Size Loaders
Most popular tooth bar
for Skid-Steer and other
loaders in the 800 to
1800 lbs. capacity range.
A rugged durable bar at
an attractive price
for Medium
Size Loaders
Most popular tooth bar
for Skid-Steer and other
loaders in the 800 to
1800 lbs. capacity range.
A rugged durable bar at
an attractive price
Big Tooth
Heavy Duty for
Larger Loaders
Heavy Duty Tooth Bar for loaders up to 15,000 lbs. gross weight. Great for the new heavy weight skid-steers or on midsize loaders used in tough applications.
Heavy Duty for
Larger Loaders
Heavy Duty Tooth Bar for loaders up to 15,000 lbs. gross weight. Great for the new heavy weight skid-steers or on midsize loaders used in tough applications.
Big Tooth
Heavy Duty
for Buckets with "Bolt-On Blade"
Heavy Duty Tooth Bar for
tough applications that fits
over a bolt-on-blade.
Heavy Duty
for Buckets with "Bolt-On Blade"
Heavy Duty Tooth Bar for
tough applications that fits
over a bolt-on-blade.
Light Duty Tooth Bar
For use on buckets with 3/8" blade only
3/8" X 3" Beveled Mounting Bar
One-Piece 3/4" Cast Steel Shank/Tooth
Mounting Brackets w/Dual Elongated Holes
Available for buckets up to 50" wide
Standard Tooth Bar
1/2" X 4" Beveled Mounting Bar
1.75" wide Fabricated Pin-On Teeth - 3/16" side Roll pin
1" Cast Steel Shanks
Mounting Brackets w/Dual Elongated Holes
1/2" X 4" Beveled Mounting Bar
1.75" wide Fabricated Pin-On Teeth - 3/16" side Roll pin
1" Cast Steel Shanks
Mounting Brackets w/Dual Elongated Holes
Big Tooth
Heavy Duty Tooth Bar
1/2" X 4" Beveled Mounting Bar
1.82" wide HD Cast Pin-On Teeth - Top 3/8" Coil Roll Pin
1 1/2" Cast Steel Shanks
Adjustable Mounting Brackets w/Dual Elongated
Holes and Tension Bolts
Adjustable Center Mounting Bracket on tooth bars 72" & over
Big Tooth Tooth Bar
for Buckets with Bolt-On-Blade
Fits over Bolt-On Blade
1/2" X 4" Beveled Mounting Bar
2" wide HD Cast Pin-On Teeth - Side Flex Pin
1 5/8" Cast Steel Shanks
Adjustable Mounting Brackets w/Dual Elongated Holes and Tension Bolts
Adjustable Center Mounting Bracket on tooth bars 72" & over
Measure your Bucket for
a Perfect Fit
a Perfect Fit
